LUXE STYLE ELEGANT SMART SOURCE 3,2L BLACK, box=0,138 m3

” A model dispenser LUXE STYLE ELEGANT SMART SOURCE without a cleaning system inside, but with a cold water storage tank with a capacity of 3.2 liters and a hot water capacity of 1 liter and a small neutral cabinet with a shelf; water enters the dispenser through a 1/4″ or 3/8″ tube from an external drinking water filtration system. This type of dispenser allows you to use several dispensers simultaneously, receiving drinking water from one drinking system, which reduces the cost of servicing dispensers when replacing cartridges in only in one system. Krausen recommends using the New Line PRO-10 Stable Pressure 800-3213 LSD Flow system with an additional 11/20/28 gallon RO storage tank. This model of drinking water system has cartridge replacement intervals 4 times less frequent than conventional RO systems, which further reduces maintenance costs! And the indicated scheme for connecting one drinking system with several independent dispensers, up to 10-15 pieces, is perfect for large offices, banks, universities, hotels, sports complexes, etc.” When connecting to the water supply, drainage system, and electricity, during the initial startup only the GREEN power switch on the rear panel must be turned ON. The RED switch may be turned ON only after the pump in the dispenser’s reverse osmosis system has completed its operation — this indicates that both internal water tanks are full (cold water tank — 5.5 L, hot water boiler — 1.0 L). The GREEN switch is the main switch and activates all dispenser functions, except for heating the water in the boiler. The RED switch is used exclusively for heating water in the boiler. If the boiler is empty, the RED switch must not be turned ON.